Definition, Betydelse, Synonymer & Anagram | Engelska ordet BUSHING

Definition av BUSHING

1. böjningsform av bush
2. presensparticip av bush

Exempel på hur man kan använda BUSHING i en mening

• In the latter case, a bearing or bushing sits inside a central hole in the wheel to allow the wheel or gear to rotate around the axle.
• This is in direct contrast to a double wishbone suspension, where moving a hardpoint or changing a bushing compliance will affect two or more parameters.
• A sleeve, split, or clenched bushing is only a "sleeve" of material with an inner diameter (ID), outer diameter (OD), and length.
• They might also feature an internal crush tube which protects the bushing from being crushed by the fixings which hold it onto a threaded spigot.
• Coilovers are made up of several components, including the damper, coil spring, bushing, bump stops, upper and lower mounts, various nuts and washers, threaded sleeves, and collars.
• leftThe ASP was a reworked Smith & Wesson Model 39 or 39-2, employing a shortened slide, a fixed bushing (in lieu of the Smith & Wesson designed collet bushing); the unique Guttersnipe sight system, clear Lexan grip-panels, a fully ramped and throated shortened barrel, and a smoothed and radiused profile to ensure no risk of snagging on the draw.
• The P7M8 is the P7's counterpart with larger trigger guard, lengthened trigger, heat shield, thumb operated magazine release, larger rear sight dovetail, protruding firing pin bushing and lanyard ring.
• 1976: Radiator (AMC Matador), engine (Chevy 350 V8 2-barrel carb, cylinders were over-bored, requiring larger pistons and rings), transmission (TH 400: Turbo Hydra-Matic), differential (Spicer 44), front lower A-frame (Ford 56 Thunderbird), front upper A-frame (63 Lincoln Continental), steering was rear drag link until 1980, pitman arm bushing tends to loosen and should be tightened every 10k miles.
• Early cars had hydraulic tappets or, rather, a unique system of eccentric bushings in each individual rocker that was actuated by a small hydraulic piston; the eccentric bushing ensuring zero valve-lash at the rocker/valve interface.
• On 26 April 1982, SFC Clifford Wilson Strickland was picked up by a Lockheed MC-130 Combat Talon of the 7th Special Operations Squadron at CFB Lahr, Germany, during Flintlock 82 exercise, using the Fulton STARS recovery system, but fell to his death due to a failed bushing at the top of the left yoke pivot bolt.
• Line terminations, at which a transmission line connects to a busbar or transformer bushing, are at greatest risk to overvoltage due to the change in characteristic impedance at this point.
• The mortise in the wooden cap on top of the key at this point is lined with bushing cloth which holds the key in position laterally, and prevents looseness and rattling, yet allows the key to move easily.
• While a double-tapped bushing has a more minor female thread concentric to a larger male thread (and thus couples a smaller male end to a larger female), a reducer may have large and small ends of either gender.
• The pivot bushing prevents frictional contact between the truck and the base plate and provides a cushioned pivot point.
• Other tools that are commonly used in a drill bushing include counterbores, countersinks, and reamers.
• The bimetal bushing, which is locked into the bore of the chock, has a high tin Babbitt lining in a steel shell.
• The Z07 performance package includes Michelin Pilot Sport Cup 2 P285/30ZR19 front and 335/25ZR20 rear tires, 394x36mm front and 388x33mm rear carbon ceramic-matrix brake discs, and revised suspension tuning (RPO FE7) which raises spring rates front and rear 62% and 22% respectively, changes stabilizer bar bushing material, and fits the Magnetorheological shocks with modified valving for a higher “passive” curve in addition to more aggressive damping tuning.
• -on many factors such as riding style, board geometry, truck setup, bushing durometer, hill angle and distance, the asphalt or concrete road surface quality and most importantly, the particularly wheel size,shape and material choice (polyurethane durometer) ridden.

Förberedelsen av sidan tog: 471,51 ms.