Information om | Engelska ordet CHAIN-DRIVEN

Exempel på hur man kan använda CHAIN-DRIVEN i en mening

• It became obsolete in the late 1880s with the development of modern bicycles, which provided similar speed, via a chain-driven gear train, and comfort, from the use of pneumatic tires.
• Valvetrain: DOHC (chain-driven), 4 valves per cylinder (40 valves total), variable valve timing on intake camshafts, sodium-cooled exhaust valves.
• A development of the existing DW10/DW12 engine, the new engines have a traditional belt-driven system, moving away from the chain-driven camshafts of the previous generation (Puma) TDCi engines.
• Mini sprints are similarly sized to midget cars, but have upright-style chassis and center-mounted, chain-driven four-cylinder motorcycle engines with displacements between 750 and 1200 cc.
• Common features between the M10 and M30 include a profile lowering 30-degree slant to the right, a crossflow cylinder head (a gas flow head in later designs) and chain-driven camshaft with rocker arm valve actuation.
• To wind a chain-driven longcase clock, one pulls on the end of each chain, lifting the weights until they are just under the clock's face.
• The chain-driven camshaft operated the valves via rocker arms, which were closed by hairpin valve springs.
• The engine would utilize features such as a chain-driven, single-overhead camshaft valvetrain with roller finger followers, a deep-skirt cast-iron block construction and cross-bolted main bearings, all benefitting long-term durability.
• ;cylinder heads & valvetrain: cast aluminium alloy; four unequal-length valves per cylinder, 32 valves total, low-friction roller finger cam followers with automatic hydraulic valve clearance compensation, simplex roller chain-driven (relay method, using three chains) double overhead camshafts, continuous vane-adjustable variable valve timing for intake and exhaust camshafts with up to 52° variance inlet camshafts and 22° for exhaust camshafts.
• The mHawk is equipped with chain-driven overhead camshafts and hydraulic lash adjusters; its compression ratio ranges from 16.
• This chain-driven Bugatti Type 18 had a 5-litre straight-4 with SOHC and three valves per cylinder (two inlet, one exhaust).
• These powerplants had a hemispherical crossflow cylinder head, two valves per cylinder (chain-driven SOHC), a two-barrel downdraft carburettor (manual choke) and breaker point-type ignition.
• It featured two chain-driven overhead camshafts per bank, 16 angled valves, hemispherical combustion chambers, inserted cast iron wet cylinder liners, and was fed through an aluminium, water-cooled inlet manifold by four downdraft twin-choke Weber carburetors—initially 38 DCNL 5 and 40 DCNL 5 on 4200 and 4700 cars respectively, later changed to 40 DCNF 5 and 42 DCNF 5 starting from December 1968.
• Chitty 1 was a chain-driven customised Mercedes chassis containing a 23-litre 6-cylinder Maybach aero-engine.
• This was a custom made part, the internals were chain-driven and the chains had a propensity for self-destruction under heavy engine load.
• For example, having experienced the obvious success of the chain-driven bicycle for decades, it is tempting to attribute its success to its "advanced technology" compared to the "primitiveness" of the Penny Farthing, but if we look closely and symmetrically at their history (as Pinch and Bijker do), we can see that at the beginning bicycles were valued according to quite different standards than nowadays.
• The valvetrain consists of chain-driven hollowcast dual overhead camshafts (DOHC) that actuate 4-valves per cylinder via roller finger followers with hydraulic tappets.
• Shaft drives were introduced in the 1880s, but were mostly supplanted by chain-driven bicycles due to the gear ranges possible with sprockets and derailleurs.
• On four-wheel-drive (4×4) models, a choice was available of either a manual, chain-driven transfer case floor shifter with manual front locking hubs, or an electronic shift-on-the-fly (a $185 option over the manual) dash knob with vacuum-activated automatic and failsafe manual override front hubs.
• The GY6 single is forced-air-cooled, with a chain-driven overhead camshaft and a crossflow hemi cylinder head.

Förberedelsen av sidan tog: 159,52 ms.