Information om | Engelska ordet D-SHAPED

Exempel på hur man kan använda D-SHAPED i en mening

• Now in ruins, the castle is quadrangular in shape, it had four corner D-shaped towers, three storeys high, and twin towers at its entrance gateway, one of which still retains its immensely sturdy vaulted roof.
• A D-sub contains two or more parallel rows of pins or sockets usually surrounded by a D-shaped metal shield, or shell, that provides mechanical support, ensures correct orientation, and may screen against electromagnetic interference.
• Their shells are D-shaped, and attached to the substrate with strong byssal fibers, which come out of their umbo on the dorsal (hinged) side.
• The D-shaped blockhouse was curved at the front, with two storeys of gun-ports, and probably had additional gun platforms stretching along the river on either side of it; ancillary buildings were placed at the rear and the whole site was protected by a rampart and a ditch, with extensive marshlands and creeks giving additional protection to the east.
• An undriven swivel caster is located at the front of most models and the back of the D-shaped S series.
• In 1933, 1935, and 1937, he and his students excavated and restored the Early Glaze-period Arrowhead Ruin east of Santa Fe, New Mexico, including a rare D-shaped kiva.
• HP-IL cables utilize a unique two-pin connector design with polarizing D-shaped shells, and can be connected together without further adapters to extend their length.
• In front of each rebounder, a D-shaped semi-circle measuring 3 m in radius is drawn; this defines the limits of a 'forbidden zone' where defenders cannot stand.
• The landward (western) side of the fort facing the ditch consists of a loopholed wall, in the centre of which is a D-shaped bastion with embrasures for three guns.
• In its archetypal steel-string Jazz/Orchestre form, the Selmer is distinguished by a fairly large body with squarish bouts, either a D-shaped or longitudinal oval sound hole, and a cutaway in the upper right bout.
• A major outcome of TFTR's troubles was the development of highly non-uniform plasma cross-sections, notably the D-shaped plasmas that now dominate the field.
• Although the kimberwicke appears to have a D-shaped bit ring like a snaffle, the bit mouthpiece is not centered on the ring, and thus applying the reins creates leverage; in the Uxeter kimberwicke, there are slots for the reins placed within the bit ring, which allows the reins to create additional leverage.
• The oldest styles have a simple loop or D-shaped frame (see: D-ring), but "double-loop" or "center post" buckles whose prongs attach to a fixed center section appear in the 8th century.
• It is a tooth about one centimetre long, elongated, recurved, lacking serrations, possessing low vertical ridges and with a D-shaped cross-section, the inner side being flattened.
• There is a D-shaped stipule at the base of the phyllode, but that falls off as the phyllode develops.
• The New England D-Ring makes use of a metal D-shaped ring that allows for a ninety degree angle to be maintained at the junction of the front trace and the hames regardless of the height of the implement being pulled.
• These include large conical teeth that are flexed somewhat inward, with an oval crosssection at their base that grows gradually more D-shaped towards the top of the crown due to the asymmetrical cutting edges, so called carinae.
• At least, the original Ibanez prototypes boasted a "teardrop" neck profile, in contrast to the more common C- and D-shaped profiles (and Ibanez's Wizard necks, which near a D-shape, though are much flatter and complement the difficulties that come with common hand motions on extended range guitars), fanned frets/ multi-scale neck, which are designed to complement the hand contortions required for fingering chords and larger stretches in addition to improving tonality, feel, and timbre for each string individually, and tighter string placement (id est, the gaps between the strings are smaller).
• In 2020, Poropat and colleagues noted a number of features that support a position for Savannasaurus outside Lithostrotia: the horizontal transprezygapophyseal laminae, the lack of constriction in the vertebrae of the sacrum, the amphicoelous caudal centra, the pneumatic excavations on the front caudals, the D-shaped sternal plates, the presence of phalanges, and the lack of a longitudinal ridge on the side of the pubis.
• Distinguishing features of Liaoningotitan include a ventral margin of the maxilla that is convex, an upper tooth row that is short and anteriorly positioned; an anterior extension of the jugal that nearly reaches the level of the anterior margin of the antorbital fenestra; a basally constricted quadrate wing of the pterygoid; imbricated upper teeth, with narrow spatulate crowns that are D-shaped in cross section, and no labial grooves or denticles; nine reduced and un-imbricated lower teeth; asymmetric lower tooth crowns which are elliptical-like in cross section, with lingual grooves and ridges and a lingually bulbous basal crown; a proximal expansion of the humerus that is about 54.

Förberedelsen av sidan tog: 394,09 ms.