Synonymer & Information om | Engelska ordet DELAMINATION

Exempel på hur man kan använda DELAMINATION i en mening

• Resistance Temperature Detector, a resistance thermometer; RTD is also used to rate or describe plywood manufacturing processes where RTD sensors significantly reduce the delamination caused by insufficient heating of the plywood during the press cycle.
• Although serviceable examples can still be found, the aluminum RG tended to undergo delamination between the iron cylinder liner and the surrounding aluminum.
• Together they contributed to the engineering science of many technological areas, including toughening mechanisms in ceramics, ceramic matrix composite materials for high temperature applications, thin film mechanics, the mechanics of interface failure for bonded materials, and the delamination and spalling of ceramic thermal barrier coatings used in aircraft engines and power generating turbines.
• On 27 April 1995, 91-year-old aircraft designer, builder and significant figure in the homebuilt aircraft movement Steve Wittman and Paula Muir, Wittman's wife, were killed when their Wittman O&O Special broke up in flight due to delamination and separation of the wing fabric, resulting in wing aeroelastic flutter.
• The similarities to graphite also include the possibility of scotch-tape delamination (exfoliation), resulting in phosphorene, a graphene-like 2D material with excellent charge transport properties, thermal transport properties and optical properties.
• In geodynamics, delamination refers to the loss and sinking (foundering) of the portion of the lowermost lithosphere from the tectonic plate to which it was attached.
• the finished condition of the installed fireproofing, upon complete drying or curing, does not exhibit cracks, voids, spalls, delamination or any exposure of the substrate.
• The failure mechanisms in FRC materials include delamination, intralaminar matrix cracking, longitudinal matrix splitting, fiber/matrix debonding, fiber pull-out, and fiber fracture.
• The most common serious adverse events (up to 5% of patients), include arthrofibrosis and joint adhesions, graft overgrowth, chondromalacia or chondrosis, cartilage injury, graft complication, meniscal lesion, graft delamination, and osteoarthritis.
• Other forms of failure include delamination, intralaminar matrix cracking, longitudinal matrix splitting, fiber/matrix debonding, and fiber fracture.
• In the field of composite materials, tufting is an experimental technology to locally reinforce continuous fibre-reinforced plastics along the z-direction, with the objective of enhancing the shear and delamination resistance of the structure.
• Formation of cracks and intermetallic growth in die attachments may lead to formation of voids and delamination, impairing heat transfer from the chip die to the substrate and heatsink and causing a thermal failure.
• The use of THz waves for non-destructive evaluation enables inspection of multi-layered structures and can identify abnormalities from foreign material inclusions, disbond and delamination, mechanical impact damage, heat damage, and water or hydraulic fluid ingression.
• Due to these functions AKNA plays in the centrosomal microtubules it also has an active role in delamination during the formation of the subventricular zone, and the regulation of the amount of access provided to cells in this zone.
• The use of THz waves for non-destructive evaluation enables inspection of multi-layered structures and can identify abnormalities from foreign material inclusions, disbond and delamination, mechanical impact damage, heat damage, and water or hydraulic fluid ingression.
• For large scale delamination, DMSO is intercalated into ML-MXene powders under constant stirring to further weaken the interlayer bonding and then delaminated with ultrasound treatment.
• After downwelling ends, a delamination event within the mantle produces extensional elements of tessera.
• However, typically relevant quality criteria of the texture are fiber orientation, gaps, wrinkles, overlaps, distortion, undulation, uniformity as well as defects in the matrix delamination, inclusion, cracks, curing, void, debonding.
• The quite different geologic assemblages of the Archean and Proterozoic eons are explained in terms of variable radiogenic partial melting of the protocrust, after hydration began, to form granitic and volcanic melts that rose from it, and of delamination and sinking of residual protocrust, densified by loss of its lighter components, that began a long-continuing process of re-enriching the upper mantle, and that ultimately enabled plate tectonics.
• The strip biaxial test has been used in different applications, such as the prediction of the behaviour of orthotropic materials under a uniaxial tensile stress, delamination problems, and failure analysis.

Förberedelsen av sidan tog: 333,92 ms.