Information om | Engelska ordet DIMMS

Exempel på hur man kan använda DIMMS i en mening

• DIMMs come in a variety of speeds and capacities, and are generally one of two lengths: PC, which are , and laptop (SO-DIMM), which are about half the length at.
• The maximum capacity on commercially available DDR2 DIMMs is 8GB, but chipset support and availability for those DIMMs is sparse and more common 2GB per DIMM are used.
• Using proprietary DDR SDRAM DIMMs, it can be upgraded to a maximum of 4 GB via four slots in two banks.
• There are eight DIMM slots on the motherboard and memory, and all O2s are expandable to 1 GB using proprietary 239-pin SDRAM DIMMs.
• It is zx1-based and can have up to 48 DIMM slots, supporting 256 MB to 2 GB DIMMs which must be loaded in matched sets of four (quads).
• A similar, Intel-developed JEDEC SPD extension was developed for DDR3 SDRAM DIMMs, later used in DDR4 and DDR5 SDRAM as well.
• However, the memory structure is the same with two banks of DIMM slots and support for memory interleaving when corresponding slots in different banks contain identical memory DIMMs.
• The original Mac Pro's main memory uses 667 MHz DDR2 ECC FB-DIMMs; the early 2008 model uses 800 MHz ECC DDR2 FB-DIMMS, the 2009 and onward Mac Pro use 1066 MHz DDR3 ECC DIMMs for the standard models, and 1333 MHz DDR3 ECC DIMMs for systems configured with 2.
• The motherboards strongly resemble dual-socket Opteron 22xx series motherboards as they share the same socket and one bank of memory DIMMs per CPU, but the motherboards of the platform have support for regular unbuffered DDR2 RAM while the Opteron setup requires registered memory.
• Rambus In-line Memory Module (RIMM), technically DIMMs but called RIMMs due to their proprietary slot.
• Modern DIMMs include a Serial Presence Detect (SPD) ROM chip that contains recommended memory timings for automatic configuration as well as XMP profiles of faster timing information (and higher voltages) to allow for a performance boost via overclocking.
• The DDR4 standard allows for DIMMs of up to 64 GB in capacity, compared to DDR3's maximum of 16 GB per DIMM.
• The i-Series has four DIMM slots on its main logic board and supports standard unbuffered or registered 100 MHz ECC SDRAM DIMMs.
• On a DDR, DDR2, or DDR3 memory module, each rank has a 64-bit-wide data bus (72 bits wide on DIMMs that support ECC).
• This socket supports four DDR3 or DDR4 SDRAM memory channels with up to three unbuffered or registered DIMMs per channel, as well as up to 40 PCI Express 2.
• Memory: up to 32GB DDR3-1333 (4 SO-DIMM sockets), in 4-core/8-thread models (QM or XM processors); up to 16GB DDR3 (2 SO-DIMM sockets), in 2-core/4-thread models (M processors; only slots 0 and 2 are usable in these models, and these won't POST if slots 1 and/or 3 are populated, and for which dummy DIMMs are provided, but aren't actually checked).
• It enables computer main memory to be persistent, using persistent memory technology and can share the DDR4 or DDR5 DIMM interconnect with DRAM DIMMs.
• Some have UniDIMM support, enabling either type of memory to be placed in the same DIMM, rather than having separate DDR3 and DDR4 DIMMs.
• Due to the tight spaces involved in RAM DIMM layouts on modern PCs, the water blocks do not sit directly on the RAM modules, but rather connect to special heat spreaders attached to the DIMMs, they then screw into the RAM block which sits on top and is thermally connected via TIM.
• CUDIMMs add a clock driver to traditional unbuffered DIMMs that is able to regenerate the clock signal locally on the DIMM for better stability at high memory speeds.

Förberedelsen av sidan tog: 357,50 ms.