Synonymer & Information om | Engelska ordet DUCTILITY

Exempel på hur man kan använda DUCTILITY i en mening

• Most alloys are metallic and show good electrical conductivity, ductility, opacity, and luster, and may have properties that differ from those of the pure elements such as increased strength or hardness.
• These additions produce a range of alloys that may be harder than copper alone, or have other useful properties, such as strength, ductility, or machinability.
• Pure niobium has a Mohs hardness rating similar to pure titanium, and it has similar ductility to iron.
• Reinforced concrete, also called ferroconcrete, is a composite material in which concrete's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility.
• ; some general qualitative properties admit more specific related quantitative properties, such as in opacity, hardness, ductility, viscosity, etc.
• A beneficial feature is that in some metals, the plastic flow reduces surface grain size, and work hardens the surface, while the material deeper in the part retains its toughness and ductility.
• Varying the amount of alloying hydrogen and the form of its presence in the nickel hydride (precipitated phase) controls qualities such as the hardness, ductility, and tensile strength of the resulting nickel hydride.
• Composites of MAX phases, an emerging class of ternary carbides or nitrides with aluminium or titanium alloys have been studied since 2006 as high-value materials exhibiting favourable properties of ceramics in terms of hardness and compressive strength alongside ductility and fracture toughness typically associated with metals.
• Hydrogen embrittlement (HE), also known as hydrogen-assisted cracking or hydrogen-induced cracking (HIC), is a reduction in the ductility of a metal due to absorbed hydrogen.
• Other intermetallics can exhibit improved ductility by alloying with other elements to increase grain boundary cohesion.
• This manufacturing process can be characterized by the following key points: It is applied to low-carbon workpieces; workpieces are in contact with a high-carbon gas, liquid or solid; it produces a hard workpiece surface; workpiece cores largely retain their toughness and ductility; and it produces case hardness depths of up to.
• Maraging steels (a portmanteau of "martensitic" and "aging") are steels that are known for possessing superior strength and toughness without losing ductility.
• When composites of Terfenol-D with ductile metal binders are created, the resulting material has increased stiffness and ductility with reduced magnetostrictive properties.
• both moisture and dryness (Aristotle explained the flexibility and ductility of metal by theorizing that it had moisture in its composition).
• Stress relief bake should not be confused with annealing or tempering, which are heat treatments to increase ductility of a metal.
• The microstructure of a material (such as metals, polymers, ceramics or composites) can strongly influence physical properties such as strength, toughness, ductility, hardness, corrosion resistance, high/low temperature behaviour or wear resistance.
• The PLC effect is known to induce blue brittleness in steel; additionally, the loss of ductility may cause rough surfaces to develop during deformation (Al-Mg alloys are especially susceptible to this), rendering them useless for autobody or casting applications.
• Losing ductility, or increasing brittleness, is dangerous in RPVs because it can lead to catastrophic failure without warning.
• In some materials, the occurrence of transgranular fracture may increase at lower temperatures due to increased embrittlement or reduced ductility.
• Embrittlement, or loss of ductility, is often accompanied by a change in fracture mode from transgranular to intergranular fracture.

Förberedelsen av sidan tog: 274,99 ms.