Definition & Betydelse | Engelska ordet FAT32

Definition av FAT32

1. (data) förkortning för File Allocation Table 32, ett filsystem utvecklat av Microsoft för operativsystemen i Windows 9x-serien; vidareutveckling av FAT

Exempel på hur man kan använda FAT32 i en mening

• The increase in disk drive capacity over time drove modifications to the design that resulted in versions: FAT12, FAT16, FAT32, and exFAT.
• For example, the FAT32 file system does not support files larger than 4 GiB−1 (with older applications even only 2 GiB−1); the variant FAT32+ does support larger files (up to 256 GiB−1), but (so far) is only supported in some versions of DR-DOS, so users of Microsoft Windows have to use NTFS or exFAT instead.
• PartitionMagic is capable of resizing NTFS, FAT16 or FAT32 partitions without data loss, and can copy and move partitions, including to other disks.
• For example, DR-DOS boot sectors are able to locate the boot file in the FAT12, FAT16 and FAT32 file systems, and load it into memory as a whole via CHS or LBA, even if the file is not stored in a fixed location and in consecutive sectors.
• The 6230 accepts MMC memory cards up to 4  GB in capacity formatted in FAT32 or FAT16 file systems (supported by later firmware releases) on which multimedia files and data can be stored.
• FAT – File Allocation Table, initially used on DOS and Microsoft Windows and now widely used for portable USB storage and some other devices; FAT12, FAT16 and FAT32 for 12-, 16- and 32-bit table depths.
• Examples include FAT (FAT12, FAT16, FAT32), exFAT, NTFS, ReFS, HFS and HFS+, HPFS, APFS, UFS, ext2, ext3, ext4, XFS, btrfs, Files-11, Veritas File System, VMFS, ZFS, ReiserFS, NSS and ScoutFS.
• Images on digital cameras are generally stored as files on a mass storage device, such as a memory card, which is formatted with a file system, most commonly FAT12, FAT16 or FAT32, which may be laid out as per the Design rule for Camera File system (DCF) specification.
• Due to different types of fields and the amount of data they contain, the length of the BPB is different for FAT16, FAT32, and NTFS boot sectors.
• It includes userland programs from μClinux and/or BusyBox, a UNIX-style file system (which can be created within HFS+ formatted iPods, or an ext2 partition on FAT32 formatted iPod), and the Podzilla GUI (and its modules).
• COM during the boot process, it contains the hardware-independent parts of the operating system, including the embedded FAT12, FAT16 and, in newer versions, the FAT32 file system code, as well as the code to provide the DOS API to applications.
• Chances of recovering deleted files is often higher on FAT12 and FAT16 as compared to FAT32 volumes due to the typically larger cluster sizes used by the former systems and due to loss of upper 16 bits of logical cluster address for FAT32.
• GParted supports the following filesystems: Ext2, Ext3, Ext4, FAT16, FAT32, HFS, HFS+, JFS, Linux-swap, ReiserFS, Reiser4, UFS, XFS, and NTFS.
• In order to guarantee interoperability, DCF specifies the file system for image and sound files to be used on formatted DCF media (like removable or non-removable memory) as FAT12, FAT16, FAT32, or exFAT.
• On Windows XP or Windows Vista, read-only access to these drives can be achieved through a program called BitLocker To Go Reader, if FAT16, FAT32 or exFAT filesystems are used.
• The software can create full disk backup archives of several file systems including: NTFS (Windows); FAT32 (Windows 9x and removable media); Macintosh systems (HFS+ and APFS) and Linux systems (ext2, ext3, ext4; ReiserFS, and Linux Swap).
• As the ReadyBoost cache is stored as a file, the flash drive must be formatted as FAT32, NTFS, or exFAT in order to have a cache size greater than FAT16's 2 GB filesize limit; if the desired cache size is 4 GB (the FAT32 filesize limit) or larger, the drive must be formatted as NTFS or exFAT.
• For that purpose, a removable device is formatted with a FAT12, FAT16 or FAT32 file system, while a boot loader needs to be stored according to the standard ESP file hierarchy, or by providing a complete path of a boot loader to the system's boot manager.
• Memory card readers, unlike smartphones, telephones and other devices, such as cameras and digital cameras, allow formatting in a file system other than FAT (FAT16, FAT32, exFAT) to NTFS in Windows, ext, ext2, ext3 in Linux or HFS, HFS + for Mac OS.
• A basic data partition can be formatted with any file system, although most commonly BDPs are formatted with the NTFS, exFAT, or FAT32 file systems.

Förberedelsen av sidan tog: 230,08 ms.