Information om | Engelska ordet JFET

Exempel på hur man kan använda JFET i en mening

• The MESFET, similarly to JFET, differs from the common insulated gate FET or MOSFET because there is no insulator under the gate over the active switching region.
• The VCR is one of the numerous interesting circuit elements that can be produced by using a JFET (junction field-effect transistor) with simple biasing.
• Opto-isolator, opto-coupler, photo-coupler – photodiode, BJT, JFET, SCR, TRIAC, zero-crossing TRIAC, open collector IC, CMOS IC, solid state relay (SSR).
• Based on an UREI reference design published by CBS, many third-party builders of CX decoders used a dual operational transconductance amplifier 13700D made by JRC (today NJR), coupled with a pair of quadruple JFET operational amplifier chips TL084 in their designs.
• p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, LASERs.
• Besides modules that contain a single power electronic switch (as MOSFET, IGBT, BJT, Thyristor, GTO or JFET) or diode, classical power modules contain multiple semiconductor dies that are connected to form an electrical circuit of a certain structure, called topology.
• A more sophisticated use of this rail bootstrapping technique is to alter the non-linear C/V characteristic of the inputs of a JFET op-amp in order to decrease its distortion.
• It consists of an n-channel JFET with the gate shorted to the source, which functions like a two-terminal current limiter (analogous to a voltage-limiting Zener diode).
• p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-i-n and avalanche photo diode, LASERs.
• Luna Overdrive, containing a Baxandall tone circuit, an op-amp, and a JFET circuit "voiced like a Fender or Marshall preamplifier circuit".
• The limiting factor for this method is the input impedance of the voltage buffer, the JFET or CMOS op-amps typically used may have input impedances of many teraohms which is sufficient for most applications.
• This is a natural extension of the fact that low-noise JFETs and low-noise JFET circuit topologies are extensively used in the design of low-noise VCRs and low-noise preamplifiers in sensor measurement applications.
• The JFET and bipolar junction transistor (BJT) are preferred for accurate matching (of adjacent devices in integrated circuits), higher transconductance and certain temperature characteristics which simplify keeping performance predictable as circuit temperature varies.

Förberedelsen av sidan tog: 273,24 ms.