Information om | Engelska ordet SPROCKETS

Exempel på hur man kan använda SPROCKETS i en mening

• When a rider operates the lever while pedalling, the change in cable tension moves the chain-guide from side to side, "derailing" the chain onto different sprockets.
• The components include cranksets comprising cranks and chainrings, bottom brackets, chains, rear chain sprockets and cassettes, front and rear wheel hubs, gear shift levers, brakes, brake levers, cables, and front and rear dérailleurs.
• Hobbing is a machining process for gear cutting, cutting splines, and cutting sprockets using a hobbing machine, a specialized milling machine.
• It is distinguished from a gear in that sprockets are never meshed together directly, and differs from a pulley in that sprockets have teeth and pulleys are smooth except for timing pulleys used with toothed belts.
• Yamaha had used a relatively unusual method, called "swaging", of affixing the cam sprockets to the camshafts.
• Beyond simply removing fairings, specific changes that exemplify the streetfighter look are a pair of large, round headlights, tall, upright handlebars such as those on a motocross bike, and short, loud, lightweight mufflers, and changes in the sprockets to increase torque and acceleration at lower speeds.
• When "safeties" replaced "ordinaries", chains and sprockets allowed small wheels to be turned faster than the pedal cranks.
• If one sprocket rotates at a constant speed, then the chain (and probably all other sprockets that it drives) must accelerate and decelerate constantly.
• Shaft drives were introduced in the 1880s, but were mostly supplanted by chain-driven bicycles due to the gear ranges possible with sprockets and derailleurs.
• The United States would supply: the engine; radiator; fan; piping; silencer; lighting; dynamo; battery; propeller shaft; transmission, including gearbox; brakes; roller sprockets; gear shift and brake control; track links and pins; rear track sprockets, hub and shafts; front idler hub and shafts; track roller, track spindles and bushings.
• Both the front drive sprockets and idlers (which were also sprocketed) at the rear of the tracks were fitted with brakes, actuated by a pair of levers by the driver.
• A freewheel (also known as a block) consists of either a single sprocket or a set of sprockets mounted on a body which contains an internal ratcheting mechanism and mounts on a threaded hub.
• A set of sprockets (called a "cassette") is mounted onto a splined shaft of the freehub to engage the chain.
• The camera intermettants also employed film milled for Dubray-Howell 'long-pitch' sprockets, unlike that of either Cinerama (B-H 'short-pitch' negative perf) or Kinopanorama (K-S 'short-pitch' pos perf).
• The epicyclic gears used within hub gears have more scope for varying the number of teeth than do derailleur sprockets, so it may be possible to get much closer to the ideal of consistent relative differences, e.
• Film perforations, also known as perfs and sprocket holes, are the holes placed in the film stock during manufacturing and used for transporting (by sprockets and claws) and steadying (by pin registration) the film.
• It varies gear tooth profiles, and/or pins along the faces of freewheel or cassette sprockets, or between the chainrings in a crankset, to ease shifting between them.
• The frame fork and handlebars were of GT manufacture while Shimano provided the major components such as the caliper brakes pedals, cranks, chainwheels, sprockets etc.
• It took nearly 2 years to complete the scanning and enhancement combined because certain scenes had to be repeatedly rescanned frame by frame or at a very slow scan speed due to the image moving out of frame every time the irreparable film tears bump through the scanner’s sprockets.
• In the second series, billed in some cases as Motormouth II or Motormouth 2, there were changes, including the introduction of new graphics and set elements based on cogs and sprockets.

Förberedelsen av sidan tog: 222,22 ms.