Synonymer & Anagram | Engelska ordet TENSILE

Exempel på hur man kan använda TENSILE i en mening

• A tie rod or tie bar (also known as a hanger rod if vertical) is a slender structural unit used as a tie and (in most applications) capable of carrying tensile loads only.
• Reinforced concrete, also called ferroconcrete, is a composite material in which concrete's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility.
• By contrast, a semi-monocoque is a hybrid combining a tensile stressed skin and a compressive structure made up of longerons and ribs or frames.
• It is also used to quantify internal pressure, stress, Young's modulus, and ultimate tensile strength.
• Most commonly, the viscosity (the gradual deformation by shear or tensile stresses) of non-Newtonian fluids is dependent on shear rate or shear rate history.
• BoPET (biaxially oriented polyethylene terephthalate) is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, A variety of companies manufacture boPET and other polyester films under different brand names.
• Gaffer tape (also known as gaffer's tape, gaff tape or gaffa tape as well as spike tape for narrow, colored gaffer tape) is a heavy cotton cloth pressure-sensitive tape with strong adhesive and tensile properties.
• A spasm may lead to muscle strains or tears in tendons and ligaments if the force of the spasm exceeds the tensile strength of the underlying connective tissue.
• This was due to tensile stresses in the Earth's crust and mantle, which resulted in lowering the earth's surface.
• Vulcanisation, a chemical process for converting polymers into more durable materials, gave the rubber a higher tensile strength, improved its resistance to abrasion and allowed the elastic to remain flexible and supple over a wider range of temperatures.
• Since the arbalest was much larger than earlier crossbows, and because of the greater tensile strength of steel, it had a greater force.
• Young's modulus (or Young modulus) is a mechanical property of solid materials that measures the tensile or compressive stiffness when the force is applied lengthwise.
• In brittle materials, the ultimate tensile strength is close to the yield point, whereas in ductile materials, the ultimate tensile strength can be higher.
• It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing).
• Normal force, exerted reactionally back on the acting body by the compressive, tensile or shear stress within the recipient body.
• If a displacement develops perpendicular to the surface, it is called a normal tensile crack or simply a crack; if a displacement develops tangentially, it is called a shear crack, slip band, or dislocation.
• Varying the amount of alloying hydrogen and the form of its presence in the nickel hydride (precipitated phase) controls qualities such as the hardness, ductility, and tensile strength of the resulting nickel hydride.
• Transverse loading causes the member to bend and deflect from its original position, with internal tensile and compressive strains accompanying the change in curvature of the member.
• It is opposed to tensile strength which withstands loads tending to elongate, resisting tension (being pulled apart).
• A structure is deemed to satisfy the ultimate limit state criterion if all factored bending, shear and tensile or compressive stresses are below the factored resistances calculated for the section under consideration.

Förberedelsen av sidan tog: 319,72 ms.